Antsle Forum

Welcome to our Antsle community! This forum is to connect all Antsle users to post experiences, make user-generated content available for the entire community and more.

Please note: This forum is about discussing one specific issue at a time. No generalizations. No judgments. Please check the Forum Rules before posting. If you have specific questions about your Antsle and expect a response from our team directly, please continue to use the appropriate channels (email: [email protected]) so every inquiry is tracked.

ForumGeneral: GeneralAntsle One XD 10G NIC overheat

Please or Register to create posts and topics.

Antsle One XD 10G NIC overheat

#1 · January 17, 2023, 9:25 pm

Hello,

I am new to Antsle. I recently bought an Antsle One XD (cpu processor: D-1518) with 2x10G ethernet port. I installed Proxmox as the OS without any VMs yet, and I found after several hours, the 10G NIC temperature goes up to 80-85degC and cause the disconnection.

Is it normal to have such high temperature on Antsle ? What is the 10G NIC temperature range ？

I asked the Antsle tech. support and the reply was to install a fan on top of the machine. But then why it is designed as fanless ?

Looking forward to any suggestions to cool the 10G NIC ( not the fan solution).

Thank you ！

Uploaded files:

cilleyperson has reacted to this post.

#2 · September 11, 2023, 8:20 pm

I have this exact same issue. As soon as i plug in the 10 GbE nic into a 10 GbE switch, the temperature sky rockets and the nic shuts down. I would love to know if anyone has come up with a solution for this or not.

this seems like a pretty significant issue honestly and it should be officially addressed.

I would go so far as to remounting the guts of the One in a new case with active cooling if I knew what the best case options are for this use.

#3 · October 10, 2023, 1:50 am

I'm curious as to whether or not a workable answer has been proposed.

only up

#4 · February 12, 2024, 10:22 am

I have not seen anything proposed for a fix, nor have I seen anyone that has a good fix. At this point I moved on from this hardware appliance. I have found other solutions that offer solid performance without the overheating issues.

Given the cost of the appliance, I would have expected this issue to have been taken a bit more seriously by Antsle. Disappointing to say the least.

#5 · May 5, 2024, 7:34 pm

Quote from cilleyperson on February 12, 2024, 10:22 am

I have not seen anything proposed for a fix, nor have I seen anyone that has a good fix. At this point I moved on from this hardware appliance. I have found other solutions that offer solid performance without the overheating issues. geometry dash subzero

Given the cost of the appliance, I would have expected this issue to have been taken a bit more seriously by Antsle. Disappointing to say the least.

I also had the same problem. Do you have a solution that provides stable performance when facing overheating issues?

#6 · February 6, 2026, 2:14 pm

I had the same issue with 10GB interfaces on both of my Antsle One XD. I am running Proxmox on both of them and getting the following error on Proxmox console :

ixgbe 0000:03:00.1 eno4: Network adapter has been stopped because it has over heated.

The interface is automatically shut down to ensure hardware protection.

To fix the problem, I have installed one fan on the top of both Antsle with the fan pushing air upward. Running like this for a while and never had problem anymore.

The fan used is the following (110 volts) : https://nmbtc.com/parts/4715ms-12t-b20-a00_60hz/

Solution is cheaper than buying a new case and fans are running quietly.

Uploaded files:

#7 · February 17, 2026, 11:47 pm

The Antsle One XD 10G NIC overheating issue is important for anyone relying on high-speed networking. Monitoring temps and ensuring proper cooling can prevent hardware throttling or damage. Useful heads-up for Antsle users! https://renewchiropractics.com/