Mario Staff
Recent posts
- Error upgrading to antMan 3.4.3. You are not subscribed to upgrade.
Yes, its the older Gentoo based OS. 0.13.x was compiled for the antsle One model Ds. The antsle One and XDs last Gentoo based version was 0.12.1.
- Error upgrading to antMan 3.4.3. You are not subscribed to upgrade.
If you are running 0.13.x or earlier and getting a failure to upgrade antMan, then try downloading the new version of antMan from your anthill.antsle.com account in the Downloads page. Copy the file…
- Set antsleOS Time Zone
The above instructions are for edgeLinux version 0.x.x For edgeLinux 2.x Get current timezone setting timedatectl or ll /etc/localtime /etc/localtime should be a symlink to the zone data file. Find…
- Nano - VM's set to autostart dont seem to restart after power fail
Here is a work around for the antlets not autostarting on the Nano. Create a script which will start the antlets. The command to start a specific antlet is virsh start ANTLET_NAME or virsh -c lxc:///…
- unable to add a NIC to Ubuntu Kubernetes antlet
@chiefspace First the interface br0,1,2.. must be enabled in antMan > Networking. Then in the antlet details (click the name of the antlet) > Virtual Network tab select the enabled interface to…
- Change port AntMan runs on?
AntMan is listening on port 3000. I would try forwarding to the ip address:3000 of the Nanos. Example: The IP addresses of the Nanos are 192.168.10, 11 and 12 publicIP:1031 forwards to…
- String index out of range: -1 when creating antlet
If the local LAN is 10.1.1.x then you should change the internal Network address. In this example I change it to 10.2.2.x with antsleOS-baseip set 10.2.2. The command does require the last '.' Btw,…
- Unable to activate antsle on anthill
trusktr, More likely that edgeLinux cannot communicate with the public internet. Can you ping anthill.antsle.com from the edgeLinux command line? Although, I think you should be able to since you…
- Nested virtualization?
Waterboy, Currently nested virtualization is not working in the antsle
- Won't reboot, won't import templates
Sean, It's possible it is filling up your root partition. The root partition is only 16G in size. If you can ssh to the antsle, check with df -h / If you cannot connect at all boot from a bootable…
- Cannot upgrade edgeLinux on Antsle
We currently have some issues with the servers supporting the upgrades. Please try again later. If you are upgrading from o.5.0 you will need to upgrade to version 0.12.0 first upgrade-edgelinux…
- after running upgrade to 0.12, cannot access the GUI
The bootable USB can be smaller... the sysrescue can be on an 8G stick. You can use any utility to create the bootable USB. The reason to use the 32G USB is one of the image files extracts to 16G and…
- after running upgrade to 0.12, cannot access the GUI
@ericblissmer-com It seems the upgrade did not finish successfully /etc/edgeLinux/version file was not written which happens at the very end of the upgrade. I would like to run the upgrade-edgelinux…
- Two physical servers with same br0 interface MAC Address
We are looking into this bug. For now we can add the mac in the 'net' file. The brX MAC address should be the same as the MAC address of its associated physical interface. First ssh to the edgeLinux…
- Massive Downloads to Antsle
You can try installing 'nethogs' emerge nethogs Run it with the command (thats a zero in br0 not the letter oh) nethogs br0 Nethogs will show the process and pid if the traffic is from the edgeLinux…
- Templates Available to download - gone
Sounds like your antsle cannot communicate with the public internet. Here is a series of videos for trouble shooting anthill activation in our docs but the 4th video covers internet connectivity:…
- Oversubscribing RAM Error
The Oversubscribing RAM error can happen if the SWAP is not in place. From the edgeLinux terminal: https://docs.antsle.com/login/ Lets check if the swap partition exists. Does the command 'lsblk'…
- --
Hello JYoung, For some reason it looks like your antsle did not find the antlets zpool which the 'zpool import -a' command probably resolved as well as the error message about "cannot find init…
- Antsle-webssh2 missing
Harvey, You can re-run the antMan upgrade script which will set that up for you again.. The the following from the antsleOS command line upgrade-antman