barduino
Recent posts
- Unable to create antlet on another ZPoll
Hi Folks, I could use the community help to diagnose this situation. I've created 2 additional zpool when I installed extra hard drives. root @ ant : /var/log # zpool list NAME SIZE ALLOC FREE…
- Help with upgrade
Big Kudos to the support team!!! Not only they gave a way out of my stuck upgrade but they also followed up and helped me with some cleanup. In essence, they gave me a script to download and install…
- Help with upgrade
Just spoke with our tech guys, they replied directly. We're on this Thanks, Johannes. Did get the email with the instructions, much appreciated. I'll report back as soon as I apply them. Cheers
- Help with upgrade
Hi Doug, Yes, I did... root @ ant : ~ # emaint --check world Emaint: check world 100% [===========================================>] 'sys-fs/squashfs-tools' is not installed 'sys-apps/lshw' is not…
- Update to 0.12.0 fails on emerge
Hi Folks, any help appreciated, I'm at a loss here. I'm trying to upgrade edge linux to 0.12.0 and after the backup I get an error with the emerge !!! Ebuilds for the following packages are either…
- Help with upgrade
I'm stuck with the upgrade. After trying upgrade-edgelinux script, it gets stuck on the emerge How do I move forward? * Last emerge --sync was 148d 15h 27m 13s ago. * IMPORTANT: 3 config files in…
- Installing certbot on the antsle (not antlets)
Yes, very manual process and not ideal at all.
- Installing certbot on the antsle (not antlets)
Same here... Just gave up. What I do to get the certs on nginx is to point to the directory inside the antlet, something like this server { listen 443 ssl; ssl on; ssl_certificate …
- IPMI port dedicated?
Thank you both. I haven't been able to make that work... Both safari and chrome download a launch file to my Mac, java starts but then it gives out a generic error. I'll try suggestions here of IE…
- IPMI port dedicated?
Hi bobh I have the IPMI configured but I can figure out how to access the BIOS screens. Can you elaborate? Every time I change the USB I can't boot the antsle and have to bring a monitor and keyboard.
- Install Virtio Drivers in Windows?
I've installed them directly on Windows on an already set up KVM and I was also able to install them as part of a blank KVM windows installation (by mounting both ISO's) Not sure about the antsle…
- My Issue with Antsle
Hi Harvey, I most likely have a different use case than you but I did feel the same pains you're describing. Due to a horrible cable modem from my ISP, I was forced to install an antlet to handle…
- [Help] - ZPool not mounting on reboot
Replying to my self here... Figured it out, this is a BIOS problem... Every time you add a USB device to the Antsle, the board BIOS will make it the first priority in the boot sequence. Very…
- [Help] - ZPool not mounting on reboot
Hi Folks, I've installed a USB drive and created a zpool on it following the documentation here . All good no issues. However, when I reboot my Antsle it does not boot up. I have to unplug the USB…
- VirtIO Driver on Windows KVM
Hi Folks, This is not really a How To, so take it with a grain of salt. I'm sure there are more elegant and SAFER ways of accomplishing this. I manage to find the Fedora VirtIO drivers for Windows…
- Install Virtio Drivers in Windows?
Yes, you can!!! Get them from Fedora . Cheers
- How-to Install Bind (DNS) ?
Hi folks, I'm trying to have dhcpd and bind in the antsle itself. I start by asking if this is a good idea, I've managed to get it to work on an lxc without issues but I was thinking that putting it…
- Use case
Some updates: Created LXC for my dhcp+dns and managed to work around my cable router idiosyncrasies (you can't turn off DHCP) by allowing it to serve only 1 ip address. From there the new dhcp kicks…
- Does anyone know how to set up a windows network that actually connects to internet?
Hi flotzilla, I had a similar experience when I bridged the windows network. In windows, I ended up with 2 network adapters one 10.1.1.x range from the antlet and another 10.0.0.x range for my…
- Use case
Hi folks, I'm looking for some advice from the community and I'll start with some context. I've just installed antOS and edgeLinux on an old laptop and I'm currently evaluating the purchase of an…