lancem
Recent posts
- Memory allocation Static or Dynamic
It sounds like the Virtio Balloon driver might be causing this "dynamic" allocation? https://stackoverflow.com/questions/43039272/dynamic-memory-allocation-in-kvm You can check if it is installed by…
- How to access the contents for SSD from a broken antsle server?
What if you try: zpool import (without a pool name or "-a"). This is supposed to list any pools that are "importable".
- How to access the contents for SSD from a broken antsle server?
If that drive came from your old Antsle, then its zpool is probably also called antlets? You can try: zpool import antlets antlets-old to import with a new name
- Power Specs for Antsle Pro
My Antsle One XD is using a 10 amp power supply (the one from the Antsle Store). I don't know if this means anything, but I was using a 9.5 amp PS (from an older antsle unit) and my XD kept randomly…
- What are the correct HD/Boot BIOS settings (via IPMI) for Antsle One XD Pro?
When I added some external drives (for an external zpool), my antsle one xd (bought in 2019) had problems booting. I saved these screenshots from the BIOS settings in case it happened again. I didn't…
- Configure Web Server for https in NGINX
I have letsencrypt and the certs on the antsle. For most of my antlets, I have a conf file in the /etc/nginx/conf.d directory that references the certificate files and does the proxy to my antlet…
- Configure Web Server for https in NGINX
As far as another source for free certs with auto-renew, I recommend letsencrypt
- edgeLinux2: Is bonjour working?
Can you ping tiberius.local? What happens (from a Windows command prompt -- I don't know about other OSes) if you type: ping -a 10.64.2.10 If you're ssh-ing from Ubuntu on Windows (Windows Subsystem…
- Windows11 Template: Could not define libvirt domain
I get that error if I try to create an antlet with the same name as either an existing antlet or an existing zfs filesystem (like antlets/oldname)
- New Windows 11 Template problem
So if I set the vCPUs to 16 and set topology: <topology sockets='1' cores='2' threads='8'/> It fails with the multiprocessor error. But if I set this: <topology sockets='1' cores='8' threads='2'/> It…
- New Windows 11 Template problem
If I give the antlet 6 vCPUs but change the topology to: <topology sockets='1' cores='2' threads='3'/> It boots up and shows 6 processors in the Task Manager
- New Windows 11 Template problem
From a command line on the antsle, if you type: virsh start antlet_name it might give an error message pointing to the problem
- New Windows 11 Template problem
I'm on the same AntlseOS and antman and I get that same error if I set the vCPUs for the Win11 antlet to > 4. But at 4 vCPUs it starts up.
- Error upgrading to antMan 3.4.3. You are not subscribed to upgrade.
Is that antsleOS 0.13.x or earlier?
- Limit CPUs on LXC antlets
In an LXC, if I do top, it shows all CPUs of the antsle (16). Also, doing grep -i processor /proc/cpuinfo also shows all the cpus of the antsle But in a KVM, it only shows the CPUs I've allocated to…
- Limit CPUs on LXC antlets
I'm on antMan 3.4.2 and AntsleOS 2.0.0 (Antsle XD Pro). LXCs respect the Memory limits, but don't seem to pay attention to the CPU limit setting. I have a plex LXC antlet set to 1 CPU, but when it…
- Cant login after antman upgrade
You can downgrade antman by specifying the version on the command line. To install antMan 3.3.1 : upgrade- antMan 3.3.1
- ERR_TOO_MANY_REDIRECTS
Have tried changing this line in the ssl conf: proxy_pass http://sslchimi; to proxy_pass http://10.1.1.16; Personally, I'd also change your mail.spicychimichanga.conf to just have: server { listen…
- Antsle device reaching out to Blocked IPs
I haven't checked all those IPs, but 2 of them: 203.218.17.99 goes to netvigator.com (Looks like a Hong Kong ISP?) and 178.150.178.111 goes to triolan.net (a Ukranian site?) Maybe you should check…
- Upgrade fails with Raspbian LXC
What is displayed when you enter: systemctl status dphys-swapfile.service