bradkuhl
Recent posts
- ISO File not uploading
I am unable to use a blank virtio KVM template and add an ISO file as a cd. Is there a trick to make it work? It fails without even trying to upload. The file is debian installer for 3CX phone…
- Create Antlets problems
1 Could not define libvirt domain for antlet LibreNMS.AirNET What is this error telling me? I can't create antlets all of a sudden...
- SNMP or IPMI monitor
I would like to monitor AntMan (on my own hardware) using snmp or ipmi. Is there a service I can turn on to do this? Or is there a package I can add to Edge Linux to enable these features? I know it…
- CPU Cores, antMan
Can someone tell me if antman is actually using all my cpu power? I bought this server used and install AntMan on it. I believe it has 4 cpus and 4 cores per cpu, which means I should have 16 cores…
- Antsle Nano Wiki
Hi @thegarnet , I enjoyed reading your Antsle Nano Wiki, I was wondering if you could explain how I could get RouterOS made into a template? RouterOS (by MikroTik) is its own operating system. They…
- Nano Template, MikroTik RouterOS
Is there a way to get a template for MikroTik RouterOS for the Antsle Nano? Has anyone used a nano for RouterOS ?
- Connect to nano
Outside of convincing the ookla folks to compile ookla for the ARM instruction set, you will have better luck looking for x86 based (non-ARM) options for mini/micro computers. Intel NUC immediately…
- Connect to nano
Thanks, I've been able to install the speedtest CLI version, however, I am needing (wanting) to host an ookla speedtest server to test from any point on my wireless radio network (wisp). I guess for…
- Connect to nano
@ddmscott @mpbaum I tried to start a new thread but it didn't get posted. I need to get Ookla Server running on my Antsle nano. I've attached an install script here. It appears that the script uses…
- Nano: Day 1
Not sure if this is the right answer or not. For my Nano on anthill.antsle.com, "My Subscriptions" is also empty. But on the "My Servers" page, it does show my Nano and it has the Essential plan…
- Ookla Server on Nano
Has anyone tried to install ookla server on any of the templates for the antsle nano? I can't get it to install... Can someone else try ti and see if they can get it to work? Ookla Server…
- Nano: Day 1
What's "init 6"? "init 6" = I ran that command at a SSH CLI to reboot the Nano. Unless you have a reason to reboot the whole unit, I would avoid rebooting it because of the long wait to reload…
- Nano: Day 1
Besides 3.0.0c addressing the console issue (that works now as already suggested), I'm not sure what 3.0.0c did. I tried running "init 6" and lo-and-behold, the 8 minute wait is back. anthilld at…
- Nano: Day 1
I never specifically upgraded to 3.0.0b like I just did for 3.0.0.c. Not sure if mine came with it or if something else got it there. I got my Nana about a week ago so I'd say I've had 3.0.0.b for…
- Nano: Day 1
@ac9hp @soneill @klfrazier When you need to reboot the GUI: Instead of using SSH to reboot the nano using "reboot now" command try using "service antman restart" and you should be under 2 min to be…
- Nano: Day 1
After I upgraded to 3.0.0b, my console (in antman) and bridged networking for my antlets started working. From this post: https://antsle.com/forum/topic/nano-day-1/?part=2#postid-1672 I ran the…
- Nano: Day 1
@ klfrazier , That 5 minute delay for me isn't just after the initial setup but after each and every Nano boot sequence that you perform. Antman is a Java application from my nosing around via SSH.…
- Nano: Day 1
There are 2 micro hdmi ports on the unit, but I do not believe either are activated on a unit that has been provisioned properly. When my unit was corrupted by power failing on the first boot, I…
- Nano: Day 1
Are you using a Windows laptop? What version os?
- Nano: Day 1
@klfrazier Did you let it load for 15 minutes on first boot? If you didn't it may haves corrupted the final install, this happened to me and there is a way to download an iso and re-flash the…