odjhlofton
Recent posts
- Antlet IP (10.1.1.x) disappearing minutes to hours after antlet start
The other weir quirk related to this issue is my subdomain.antsle.us only works within my network. If I'm away from home, I cannot access my Antsle at anytime regardless of reboot, but when at home…
- Antlet IP (10.1.1.x) disappearing minutes to hours after antlet start
I have two antlets created. Anthill can still see and manage them through the web gui. However when trying to ssh into the antlet after accessing the main Antsle first, I cannot access them.…
- edgeLinux 0.13.0
I'm also having the same issue with the general upgrade-edgelinux. It just reverts to 0.12.1 I've also had issues with previous edgelinux upgrades as well and submitted a ticket that ultimately fixed…
- Upgrade to edgeLinux - Complete disaster
Some of the issues mentioned would appear to go beyond the scope of the solution I found but will try my best to give best educated guesses to comments posted after my solution post. @itsky - I think…
- Upgrade to edgeLinux - Complete disaster
One of my antlets which had a bridged connection to my local network did not work anymore which had 2 bridged connections for both eth1 and eth2. I needed to stop the antlet and delete the two…
- Upgrade to .12.x for loyal community
Please see my resolution in the other post to this issue. https://antsle.com/forum/topic/upgrade-to-edgelinux-complete-disaster/?part=2
- Upgrade to edgeLinux - Complete disaster
@will @haplopeart @itsky You're not going to believe it but it works now. I do agree it is a port mapping issue with the upgrade. This seemed to be an issue since I had previously set up two bridged…
- Upgrade to edgeLinux - Complete disaster
@haplopeart @will I've tried every port on the antsle and cannot get a single one of them to work right. I looked at the article @haplopeart shared and it is similar except at least that person could…
- Upgrade to edgeLinux - Complete disaster
@will yeah service net.br0 returns started. No errors when I restart it either. I set up br2 and it does get an ip address of 10.10.1.91 but still can't ssh into it or ping from the antsle to the…
- Upgrade to edgeLinux - Complete disaster
@will Tried changing to DHCP and during startup can tell that it pulled an ip as it showed green when using the DHCP service. However now that it's trying to use 10.10.1.90 instead of 10.10.1.183, I…
- Upgrade to edgeLinux - Complete disaster
@will Thanks for the reply. I checked the `/etc/conf.d/net` file and I noticed it didn't match exactly to the sample you sent. I added the fallback_br0 and the routes lines to the file. It still did…
- Upgrade to edgeLinux - Complete disaster
I am also having the exact same issue. I can't ping the antsle's IP address but my antlets appear to be working. I too got a bunch of errors as I was upgrading to edgelinux. My system restarted and…