mshappe
Recent posts
- Will edgeLinux be updated to version of the OS
Good to hear! Thank you!
- Will edgeLinux be updated to version of the OS
edgeLinux is getting long in the tooth, still running a Linux 3.x kernel and an old CentOS. Is there any plan to update this to something modern?
- Performance issues related to KVM (possibly)
Unfortunately, this wound up being a hardware issue, that had to be addressed by sending it back to have the NVMe drive replaced. It's been running like a dream since, tho'.
- Upgrading to 3.2.0
After upgrading, the other issues are fixed, but that tooltip (the one that is part of the text wherever backup free space is described) is still wrong.
- Upgrading to 3.2.0
Hi @mshappe - Thanks for the report. We'll fix that. Do you remember which tooltip said you were on the Essential Plan? We'll check as well but it would probably make it easier for them to find if…
- Upgrading to 3.2.0
This afternoon, I attempted to upgrade to 3.2.0--I don't actually have a cluster, but I still like to stay up to date. The upgrade script APPEARS to run smoothly, and says that the upgrade is…
- unit antletsl.service entered failed state
I was also having this problem and came here looking for a solution before pestered Support. Can confirm that this fixes it. Not sure why that's not already present. Thanks!
- CentOS-based edgeLinux?
It's nice to see progress. Unfortunately, I need a process that is less chancy :-) I am definitely using at least one of my antlets "in production", and would be loathe to lose it. Still, I will…
- CentOS-based edgeLinux?
The world has been a messy place the last few months, so I'm not surprised if it's taking a while, but can we get an ETA on this?
- How to reset Antsle back to all defaults
But were you able to restore antlets from an edgeLinux 1/Gentoo box to an edgeLinux 2/CentOS box? That's the main thing I'm curious about. I've been holding off upgrading my antsle to EL2.0 because…
- How to reset Antsle back to all defaults
I'm curious about your backup/restore strategy for this. Did you use the built-in backup and heal capabilities, or did you backup some other way?
- Network Bridge preventing connecting to internet
I had an issue with this early on in my antlets, as well. If you have two interfaces both getting dhcp leases, they will both be considered potential "default" routes. You need to assign metrics to…
- CentOS-based edgeLinux?
Good to hear! Thank you for the update!
- CentOS-based edgeLinux?
OK, so, recognizing that we all have a LOT of other things on our mind right now and that this is NOT the most important one, I still am sort of wondering where things are at with a general release…
- 502 Bad Gateway after setting up InstantSSL
Make sure, after you set up SSL, that you're using an https and not http URL! I get bitten by that occasionally.
- Performance issues related to KVM (possibly)
As an update: while it is possible that the KVM changes above improve performance and make odd behaviour less likely, I have encountered an entirely unrelated-to-KVM (I think) issue with the NVM…
- Performance issues related to KVM (possibly)
@mshappe, thanks for the helpful post. I'll ask some team members to take a look at this and see if we can implement it in the templates. Please keep those updates coming. Feel free to reach out to…
- Fine I'll start | My Antsle Setup So Far
I actually wound up using the bridging method--adding a virtual interface and setting it up to DHCP from my LAN, and then getting UPnP working through my router (which allows remote access as well).…
- Performance issues related to KVM (possibly)
I was seeing a situation where, every evening, the load average on the hypervisor (that is, the antsle itself) would start to climb, even though CPU and I/O were virtually idle. Googling around, I…
- Fine I'll start | My Antsle Setup So Far
Hello again, folks! I just got my Antsle set up and running (YAY!). Trying to get Plex Media Server running in an Ubuntu LXC antlet. Port forwarding does not appear to work. When I set it up in…