doug.knowles
Recent posts
- 3.4.1 antman upgrade failing
See below
- Trick to getting CPANEL on the antsle?
CPANEL is a control utility used on Lamp or lemp virtual server. It allows GUI based monitoring and configuration for all the services that you have installed. I do not believe it something that…
- Can't ping 10. network
10.1.1.* are private networking addresses within the antsle or edgelinux device and are not accessible to the network where the anstle device resides unless you expose it. antsle provides bridging…
- Help with upgrade
Have you done what it is saying you need to do so it can forward? !!! Please run ” emaint --check world” I would try that.
- Moving Antlets from one Antsle to another.
Thank you so much... I have successfully moved 2 antlets from one antsle to another. antlet 1 - Ubuntu 18.04 lxc antlet 2 - Ubuntu 18.04 kvm notes for others. i recommend creating a work directory in…
- Moving Antlets from one Antsle to another.
Did you intend to include a link to the instructions?
- Moving Antlets from one Antsle to another.
Has anyone been successful yet, moving an antlet as it is configured from one box to another? either edglinux on your own hardware or to another antsle box?
- new Ubuntu 18.04 LXC Templates - using netplan instead of ifupdown
thanks for your reply..... I have dealt with it myself for my purposes..... My point, is that the Official Antsle Documentation for network bridging needs to be updated.
- edgeLinux 0.13.0
Instead of running “edgelinux-upgrade”, use “edgelinux-upgrade 0.13.0”. that should run the 0.13.0 upgrade.
- new Ubuntu 18.04 LXC Templates - using netplan instead of ifupdown
new Ubuntu 18.04 LXC Templates - using netplan instead of ifupdown network bridging for ubuntu in documentation, antsle, and edgelinux need to be updated with instructions for netplan configuration.
- Backups Beta Bug....
https://youtu.be/dyQnKuF9smQ Webinar video
- Backups Beta Bug....
I had 3 running/uploading at the same time. I believe that the upload is throttled down so that the server can run with as little interference from the upload as possible. Protecting the uptime and…
- Backups Beta Bug....
My antlets were running... all three. Did single request on each. After they finished I setup daily on two of them .... since the vpn server does not change much, I left it as a manual backup. My…
- Backups Beta Bug....
I got the blank msg box also. But the was no errors that I know. Looked like it was completion notice when I saw it.
- Need help with the setup of my Antsle purchased in Apr, 2017
Plug it into the network, power it up, look at the attached devices for the network and use that IP address to ssh in as [email protected] and the password in your paperwork. Then run the command…
- LXC vs KVM Port Forwarding to virtual network interface different results..
Problem Resolved. --- Router was failing because of its limitation on the number of internal connections to external ports. Netgear Orbi
- LXC vs KVM Port Forwarding to virtual network interface different results..
creating antlets running ubuntu 16.04: when I create an LXC version and network bridge and expose it to the local network, the ports forwarding from the router to the local IP in this case ports 80…