djurden
Recent posts
- Change IP Address
I just got a new router and configured it with a few VLANs. I now want to reconfigure my Antsle to be on one of the VLAN subnets. When I do this using the Network tab on antMan and restart I cannot…
- Attach a NAS LUN to my Antsle
I have a NAS device and created a LUN on it. Is it possible to add that LUN to the Antsle and then use it as a new Zpool?
- Backup Hangs
I restarted the server...now it works.
- Backup Hangs
The storage is NAS. It is mounted with: mount -t cifs -o username=xxx, password=xxx //192.168.nnn.nnn/Antsle /mnt/backups. The antlet is a Windows 11 VM and powered down when trying to perform the…
- Backup Hangs
What details do you need?
- Backup Hangs
I'm doing a self-managed backup and it always hangs. I delete the backup and snapshot and try again. It keeps hanging right at this point. I have attached a screen shot.
- Reset Nano ipaddress
I went to the store and got a USB Keyboard. I was able to get it working again! Thanks.
- Reset Nano ipaddress
I have an HDMI adapter. But I don't have a USB keyboard. So I got a PS2-USB adapter. But the keyboard does not work no matter what USB port I plug it into.
- Reset Nano ipaddress
I had to change my internal network ipaddress from 192.168.1 to 192.168.111 due to a conflict with a client VPN network. Now I cannot get to my Nano anymore. How do I get to it via antHill anymore,…
- Delete CDROM
I created a new antlet, installing from a CDROM. So I created a new blank KVM antlet, added the ISO as a virtual drive CDROM. Then I installed the OS. Now I don't need that CDROM anymore. I cannot…
- Delete CDROM
I added a virtual drive to my Windows antlet. It is an ISO and was added as a CDROM. I added it to be able to install software. Now I am done with it. How do I remove the virtual drive CDROM?
- No valid license found - own hardware
I have my own hardware on which I installed the community version. I registered it in antHill. It shows that it is registered and antHill is communicating with it. This server has no Plan. I also…
- Import VMs from Hyper-V
I am moving some of my VMs off of my laptop, running Hyper-V, onto my Antsle. As I understand this I: Convert the vm to a qcow2. Copy the file to the Antsle. Import it as a template. Create an…
- Could not define libvirt domain for antlet...
The name of the template is HRTest - KVM. I have tried naming the antlet HRTest and Plant. I get the same message both ways.
- Could not define libvirt domain for antlet...
I have a template that I imported. It is from a Windows VM that existed on VMWare. I converted it to a qcow2 file before importing. Now when I try to create an antlet using that template I get a…
- Manually create template
I have a qcow2 file that I created from a virtual machine from VMWare. Now I am trying to import this as a template. I started the import yesterday morning; so it has been importing for about 20…
- Changed ip address to static cannot access anymore
I was able to access it via my <antslename>.antsle.us url. When I did, the antsle restarted, reset itself with the old IP address and now it is working. HOWEVER, when I restarted, the computer…
- Changed ip address to static cannot access anymore
I tried changing the IP address on the Antsle to a static IP address. Now I cannot get to it anymore. When I ping the new (static) or the old (dynamic) I get no response. I have a monitor and…
- OpenVPN
@haley Started with Debian 8.5. Installed updates....then upgrade. Edited my /etc/network/interfaces file setting eth1 with a static ip address and rebooted. Ifconfig shows correct settings. I can…
- OpenVPN
Ok...I'll start over. I'll start with Debian 8.5 and let you know where I get stuck.