Recent activity
- pxe boot antlets
So I've been trying to find faster ways of building antlets using the centos9 stream iso's. Prior to me doing the edge linux upgrades since I was way behind apparently I was able to PXE boot off my…
- Trying to upgrade old Antsle One (red) to EdgeLinux 2.
Thank you for the quick reply! I appreciate it. The good news is, other than needing to use the ip address (and not myantsle.local:3000), it is still working normally.
- Create antlet with smaller disk space
Hello @kryten I was curious to see if I got the same error when performing the command line and I indeed I did! I have shared this with our Support team for their guidance in this matter. I should…
- Trying to upgrade old Antsle One (red) to EdgeLinux 2.
Hi @megmeyer Thanks for reaching out to antsle Support. I'm sorry that you are getting errors when trying to boot edgeLinux 2.0 on your antsle One red. I have reached out to our Support team…
- Trying to upgrade old Antsle One (red) to EdgeLinux 2.
The install USB boots, and I hit enter to Install Edgelinux 2.0, then a whole lot of text starts flowin, then it stopps with a Kernel panic. See attached pictures:
- Create antlet with smaller disk space
Hello @kryten Can you let us know what templates you were using that you were trying to shrink? I have an idea but it will require some testing. I'll be testing with my Windows 11 antlet. Thanks,…
- Create antlet with smaller disk space
Hi All I want to create antlets for small OS's, I want the disk to be 50GB. Currently i cant see how to create an antlet with a 50GB disk, they all default to 100GB. And if I create the antlet with…
- How to resize the disk of a virtual machine once created
Hi @kryten Thanks for sharing this tip! Thanks, antsle Support
- How to resize the disk of a virtual machine once created
Hi All I worked it out in the end... When I resized the antlet virtual disk it put it at the end of my partitions so the drive looked like the image attached... The unallocated space was at the end,…
- How to resize the disk of a virtual machine once created
Hello I tried to follow the instructions to extend my windows C:. Shutdown antlet Updated antlet virtual disk to 150GB from 100gb restarted the antlet opened "Disk Manager", but the "extend volume"…
- Fedora 28 - virtual NIC - bridge network - static IP not assigned
Hi @scolberg Thanks for the feedback and testing! Thank you, antsle Support
- Fedora 28 - virtual NIC - bridge network - static IP not assigned
I can confirm that the new LXC template works for both DHCP and Static IP on my Gentoo box. DHCP worked without any configuration :) Thank you
- Fedora 28 - virtual NIC - bridge network - static IP not assigned
Hi @scolberg I released template for Fedora 36 - LXC for x64-86 tonight. All of my systems are running edgeLinux 2.0 or higher (CentOS-based). Can you let me know how it works on your side? Since…
- Fedora 28 - virtual NIC - bridge network - static IP not assigned
Thanks for confirming. I was tempted to try the upgrade this weekend, thinking the issue might be related to Gentoo. The product and sandbox I am attempting to build is certified for the Red Hat…
- Fedora 28 - virtual NIC - bridge network - static IP not assigned
Hi @scolberg Yes, thanks for asking. All of my antsle's are running CentOS-based edgeLinux (2.0 or higher). I'm also working on new template for Fedora 36 - LXC but the new Fedora is based on nmcli…
- Fedora 28 - virtual NIC - bridge network - static IP not assigned
Thanks for the response. I am using the Antsle provided template. Was your test on a Gentoo box or a CentOS box?
- Fedora 28 - virtual NIC - bridge network - static IP not assigned
Hi @scolberg I'm assuming that you are using the Fedora - LXC template created by antsle. I'm seeing similar errors when trying to access the bridged network (eth1) even when using DHCP. We are…
- Cannot start Antlet
Hi @stephanilope You can use the following commands to remount the zpool and list its status below: To import all available zpools: zpool import -a To list all zpools: zpool list Thanks, antsle…
- Fedora 28 - virtual NIC - bridge network - static IP not assigned
I installed the Fedora LXC and setup a virtual NIC for a bridged network. The static IP address I defined is not being assigned. In my google research I found an issue that sounds similar. "The…
- Am I required to have a plan to upgrade?
All good - that worked. Thanks, Bruce