Recent activity
- S.M.A.R.T. Status Bad, Backup and Replace
Hi @danielbarros Here is some instructions on changing out your NMVe drive below: Remove the cache from the zpool with this command: zpool remove antlets /dev/nvme0n1 After replacing the NVMe drive,…
- Create antlet with smaller disk space
Hi @kryten Yes, you can use snapshot and then perform rollback in case it doesn't work out. Did you see my response in the other forum post about /antlets/_tmp directory? You can clear those out if…
- Create antlet with smaller disk space
Hi Daniel I cloned the anlet and tried the command above and it failed running out of disc space... If i do a snapshot and not clone will the snapshot be abled to be used if i have an error again?…
- S.M.A.R.T. Status Bad, Backup and Replace
Hi @danielbarros Yes, that is correct. Our antsle's are only using the NVMe drives as cache for the zpool to increase performance. Yes, we recommend backing up all your antlets before proceeding with…
- Canty Start Antlets
Hi @kryten From talking with our developers, the files stored in the /antlets/_tmp directory are used for temporary storage when sending and receiving antlets and they can be removed. Thank you,…
- Create antlet with smaller disk space
Hi @kryten Thanks for sharing the info about your system. No, you do not need to shrink the volumes on your windows installation. Yes, the first command makes backup of your qcow and the second…
- Trying to upgrade old Antsle One (red) to EdgeLinux 2.
Hi @megmeyer Thanks for the update. From looking over the support article, this was for already existing CentOS or RedHat installations that wouldn't boot up. Yes, antsleOS/edgeLinux 0.5.0 through…
- Trying to upgrade old Antsle One (red) to EdgeLinux 2.
Hi Meg: I have reached out to our Support team and they mentioned this can sometimes occur when the system overheats. Are you using your antsle in a cool and well-ventilated place. Although I wasn't…
- Trying to upgrade old Antsle One (red) to EdgeLinux 2.
On my Home Lab, I've been able to use http://antsle_host_name:3000 where antsle_host_name is the host name of your antsle. Yes, I've heard that some have had to use the Private IP Address to log into…
- Create antlet with smaller disk space
Thanks Daniel A couple of questions/Comments When i @ Disk Management in windows I have Sys reserved (50mb), c: (149GB) and recovery (593mb). Of the C: only 34gb is used. To use the commands above,…
- Trying to upgrade old Antsle One (red) to EdgeLinux 2.
Hi Meg: I have reached out to our Support team and they mentioned this can sometimes occur when the system overheats. Are you using your antsle in a cool and well-ventilated place. Although I wasn't…
- S.M.A.R.T. Status Bad, Backup and Replace
It looks like my NVMe drive is about to die. I've been postponing for a good while the upgrade from gentoo to 2.0 for fear of losing/failing to restore my antlets. I have 2 x 1 TB SSD and 1 x 512 GB…
- Create antlet with smaller disk space
Hi @kryten Can you let us know how much space (such in Disk Manager in Windows) is actually being used by the antlet? If you are using less than the actual capacity, you can try shrinking the qcow2…
- Canty Start Antlets
Thanks Daniel That worked but I found that I was running low in memory as well. I deleted two antlets and can now start them normally but I seem to have wasted memory. Here is my concern Directory…
- Canty Start Antlets
Hi @kryten Thank for reaching out to antsle Support. You had let us know that none of the antlets are starting. Can you give us the output of the following commands? To list the zpool: zpool list To…
- Create antlet with smaller disk space
Thanks Daniel Some of my Antlets are less than the 100GB assigned but two of the others are 98gb(and when i look at windows they are only using ~30gb)
- Canty Start Antlets
Hi All I am having some issues. They really have been happing for a while, Daniel is addressing some but this latest seems strange. I cant start any antlet, after starting they seem to go straight to…
- pxe boot antlets
Sure no problem. I have an antlet running centos9 stream as a PXE server. The DHCP is handled by a unifi UDM pro appliance configured with the network boot options.
- Trying to upgrade old Antsle One (red) to EdgeLinux 2.
Hi Meg: Do you mean using the older version of antsleOS / edgeLinux? On my Home Lab, I've been able to use http://antsle_host_name:3000 where antsle_host_name is the host name of your antsle. Yes,…
- pxe boot antlets
Hi @davidlandry2019 Thanks for posting about PXE Boot. Can you let us know what kind of PXE Boot server you are using? Yes, this should be supported in antlets. However, I have not personally tried…