rob.tavoularis
Recent posts
- Power failure
I had a similar issue where it just lost power after about 16 or 17 months of use. At first it would power back on for a minute before powering off, then not at all. I didn't feel like throwing any…
- RAM Oversubscription
From what I have read, RAM oversubscription should be supported, however I continue to receive "you are oversubscribing too much RAM, please stop some other antlets to start this one" error message…
- Having Trouble with Nested Virtualization (Full instead of VT-x).
I am running a VM that requires VT-x virtualization capabilities, however it appears (using lscpu command) that it is using full virtualization. Is it possible to change the nested virtualization…
- oversubscribing ram error even though other antlets are paused
Hi My Antsle has 68 GB or RAM. I recently created an antlet with 64GB or ram and paused two antlets running 32GB each, however when I try to start my 64GB antsle (that i've since removed to 60GB, and…
- Cannot delete antlet
Hi: I created an antlet and then deleted the virtual drive. It then was removed from my antman screen, however the folder still exists in /antlets and I cannot remove it (Device or resource busy)…
- Antsle keeps reloading
Hi @Will: Id honestly love to try that because I want to be on the latest version, but with support replying once every 36-48 hours and their first and only troubleshooting step being to RMA (they…
- Antsle keeps reloading
As an FYI my antsle has been stable for 10 days on 0.10.0.
- Downgrade Antman
So what are the available versions in 10 to upgrade to? I did 0.10.0 and I think I got 0.10.0c, are there more recent versions in the 0.10.X train?
- Downgrade Antman
Thanks Will - is it possible to know what the available versions of 10 are? Perhaps i can downgrade to a more recent version than 0.10.0 - I have asked your colleague in support how to find what…
- Antsle keeps reloading
Thanks William - I'll confirm if it reloads again on 0.11.1d, and if so, I'll downgrade and if it still reloads I guess I'll RMA, although it will hurt to be without it for a few days and I hope I…
- Downgrade Antman
Does anyone know how to downgrade antman? Mine has been reloading ever since upgrading to 0.11.X.
- Antsle keeps reloading
@will It is rebooting. It is plugged into a UPS and other devices connected to the same UPS are not affected, so I don't think it's a power issue. Additionally while the previous reload happened when…
- Antsle keeps reloading
Hi @will I was previously on 0.11.1c. After today's crash I upgraded to 0.11.1d, but I won't know if it worked until a couple of days have passed - is this something known to 0.11.1a-c? Thanks, Rob
- Antsle keeps reloading
Ever since upgrading to 0.11 my antsle reloads every 1.5 days. My antlets lose information when they are reloaded so each reload is hurting me. Any Suggestions?