Recent activity
- New Windows 11 Template problem
Yes, it finally started up. I had to change the topology to what "lancem" said and it worked.
- New Windows 11 Template problem
Hi @terryj72 Please let us know if you get any errors when using: virsh start antlet_name where antlet_name is the name of your antlet.
- New Windows 11 Template problem
Hi @lancem Thanks so much for investigating and sharing with us!
- New Windows 11 Template problem
So if I set the vCPUs to 16 and set topology: <topology sockets='1' cores='2' threads='8'/> It fails with the multiprocessor error. But if I set this: <topology sockets='1' cores='8' threads='2'/> It…
- New Windows 11 Template problem
If I give the antlet 6 vCPUs but change the topology to: <topology sockets='1' cores='2' threads='3'/> It boots up and shows 6 processors in the Task Manager
- New Windows 11 Template problem
From a command line on the antsle, if you type: virsh start antlet_name it might give an error message pointing to the problem
- New Windows 11 Template problem
Yes, I was able to put it back in but it still will not start. I even deleted the antlet, created another one with a different name with only 4vCPUs and it just keeps saying "Process Successful" but…
- New Windows 11 Template problem
Hi @terryj72 Thanks for sharing. Sorry to hear about that. Are you able to put the line back in? <topology sockets='1' cores='1' threads='4'/>
- New Windows 11 Template problem
Hi @lancem Thanks for sharing. I don't have any systems that more than 4 vCPU's. I'll share with our team.
- Error upgrading to antMan 3.4.3. You are not subscribed to upgrade.
Yes, its the older Gentoo based OS. 0.13.x was compiled for the antsle One model Ds. The antsle One and XDs last Gentoo based version was 0.12.1.
- New Windows 11 Template problem
I'm on the same AntlseOS and antman and I get that same error if I set the vCPUs for the Win11 antlet to > 4. But at 4 vCPUs it starts up.
- Error upgrading to antMan 3.4.3. You are not subscribed to upgrade.
Is that antsleOS 0.13.x or earlier?
- New Windows 11 Template problem
delete the <topology...> line, now antlet will not start.
- New Windows 11 Template problem
Hi @terryj72 Thanks for sharing. Can you also let us know the version of antMan & edgeLinux you are using? You can find by going to Settings in antMan. You can also use the commands below to find…
- New Windows 11 Template problem
Using an Antsle one D+
- New Windows 11 Template problem
Hi @terryj72 Can you let us know what type of hardware you are using with Win11 templates? It's been tested with antsle One (Avaton CPU) and own hardware with Core i5 processor.
- Reset Nano ipaddress
Hi @djurden That's great to hear! Thanks for sharing.
- Reset Nano ipaddress
I went to the store and got a USB Keyboard. I was able to get it working again! Thanks.
- Reset Nano ipaddress
I have an HDMI adapter. But I don't have a USB keyboard. So I got a PS2-USB adapter. But the keyboard does not work no matter what USB port I plug it into.
- New Windows 11 Template problem
Downloaded the new Windows 11 template, created antlet, went to console and this error shows up. Stop Code: Multiprocessor Configuration Not Supported Anyone else having these issues?