Recent posts
- Replaced Powercord and now super micro
Any thoughts Daniel?
- Replaced Powercord and now super micro
Here ya go!
- Replaced Powercord and now super micro
So i tried running the command again and this happen: zpool import -a cannot import 'antlets': invalid vdev configuration
- Replaced Powercord and now super micro
Something magic happened and i can now get into my dashboard at least.
- Replaced Powercord and now super micro
I attempted to do it with a email and password but antHill is currently unavailable
- Replaced Powercord and now super micro
I try to login presenting my antsle token and skip setting up a username and password.
- Replaced Powercord and now super micro
Heres what i get when i try to `zpool import -a`
- Replaced Powercord and now super micro
Here's what i got... This is what i get when trying to do the update
- Replaced Powercord and now super micro
ok after I enabled the port and set it to auto connect it started working. Now i'm trying to get it to upgrade-antman but that is failing. I went ahead and attempted the zpool import -a but the…
- Replaced Powercord and now super micro
Working on the updates now.
- Replaced Powercord and now super micro
The future attempts i did on the second drive and go it to do the install. However when i get to the commandline it failed to start the edgeLinux installer.
- Replaced Powercord and now super micro
Here are some steps going forward: 1) Perform fresh install of edgeLinux using the documentation below: https://docs.antsle.com/get-started/getting-started-with-edgelinux-software-only-version I…
- Replaced Powercord and now super micro
Here is the output.
- Replaced Powercord and now super micro
So i attpted all three of these options as the bootoption #1 and none of them worked. 2 of them brought me back to the previous commandline. The 3rd said it failed and press any key to try again.
- Antsle will not start or respond
This worked for me.
- Replaced Powercord and now super micro
Here's the photo.
- Replaced Powercord and now super micro
I replaced the powercord, my assumption is that it went out, and now it's getting power and the network cable shows traffic. However I only get the SuperMicro nothing else. I double checked i have…