Recent activity
- What are the correct HD/Boot BIOS settings (via IPMI) for Antsle One XD Pro?
Hi @lancem Thanks for sharing your screenshots. My screenshots didn't come through the first time, so I uploaded them in the original message.
- What are the correct HD/Boot BIOS settings (via IPMI) for Antsle One XD Pro?
When I added some external drives (for an external zpool), my antsle one xd (bought in 2019) had problems booting. I saved these screenshots from the BIOS settings in case it happened again. I didn't…
- Cannot access Windows server 2019 clone via RDP and Debian creds not working
Hi Daniel Is there any news on this issue.. I have the same issue... thanks
- What are the correct HD/Boot BIOS settings (via IPMI) for Antsle One XD Pro?
Hi @brandonwolf I've got an older antsle One but the configuration will be similar. You can follow steps below: Here are some steps to diagnose the boot issue: 1) After turning on the antsle, keep…
- What are the correct HD/Boot BIOS settings (via IPMI) for Antsle One XD Pro?
Hi -- I had a power outage and my Antsle One XD Pro did not recover. I logged in via IPMI and am seeing: CLIENT MAC ADDR: [My Mac Addr] CLIENT IP: 0.0.0.0 MASK: 0.0.0.0 DHCP IP: 0.0.0.0 PXE-E7B:…
- Access to local network
Hi @kryten Glad to hear that it's working!
- Access to local network
Thank you, Daniel.... works perfectly
- Increasing Storage on Antlet
Hi @jeffkerby Can you let us know what type of antlet and operating that you are using? If you are using LXC, this will appear as unlimited (infinite) since it's essentially using the same file…
- Increasing Storage on Antlet
Hi, How do I increase storage on my existing Antlet? I have it set for unlimited, and it shows I have used all of 298GB but I have 2 1TB and 2 500GB drives on my antsle how do I make more use of the…
- myantsle.local login page exposed to internet
Hi @akak01000101 Yes, this is the default behavior of edgeLinux and nginx to redirect HTTPS to port 3000 on the antsle to access antMan. Hence, if you go to https://your-antsle-ip, it will be…
- Am I required to have a plan to upgrade?
Hi @brandonwolf If you are running on antsle hardware, you can use the Home Lab and use edgeLinux/antMan without plan. Upgrading to plan gives you access to more features and support. You can use…
- How Hot should antsle one get?
Hi @kryten Can you let us know what model of antsle One you received? It's normal for antsle's to be slightly warm. It's recommended to keep your antsle One in cool and well-ventilated area.
- Access to local network
Hi @kryten By default, the antlets access their own internal network on 10.1.1.x. You'll need to add a bridged nic to access your local network (192.168.1.x). You can follow instructions here:…
- Am I required to have a plan to upgrade?
Saw that 3.4.3 was out, attempted to run antman-upgrade and I'm receiving a message that I am not subscribed to upgrade and to purchase a plan...that's true. I'm just running a homelab on an older…
- How Hot should antsle one get?
Hi All Just got my Antsle one. I wanted to know how hot should it get? up and running it really hot to touch.. is this normal? thanks p
- Access to local network
Hi All... I am new to antsle devices and have a question. I have set up a win10 antlet and want to access my local network so i can map a NAS on the local network... so i want to have an antlet say…
- Configure Web Server for https in NGINX
No examples needed. Thanks! I just used letsencrypt on a couple domains. It's way better than registering with a ssl provider like sslforfree.com and configuring everything manually. I get what you…
- Unable to install unzip
Hi @pjhunter Thanks for the input on the template. Glad to hear that worked for you. By the way, I've updated the LEMP-Stack - LXC for x64_86 template so it has the newest updates and includes…
- Configure Web Server for https in NGINX
I have letsencrypt and the certs on the antsle. For most of my antlets, I have a conf file in the /etc/nginx/conf.d directory that references the certificate files and does the proxy to my antlet…
- Configure Web Server for https in NGINX
@lancem If you use letsencrypt, where do you run the certbot from, the antsle (nginx) or on the antlet (apache). It almost sounds like you run it on the antlet, then would have to remotely copy it to…