Recent activity
- How to access the contents for SSD from a broken antsle server?
Hi @vmyantsle Thank you for providing the output of the commands. From looking at the output, it may be antlets partition on /dev/sdc4 may have been overwritten (reslivered). Do you have another…
- How to access the contents for SSD from a broken antsle server?
Hello @daniel-luck , Here is the output of the commands root@server1:~ # zpool list NAME SIZE ALLOC FREE EXPANDSZ FRAG CAP DEDUP HEALTH ALTROOT antlets 216G 317K 216G - 0% 0% 1.00x ONLINE -…
- No signal on VGA
Hi @davidthomas Thanks for the wonderful solution that using VGA to HDMI converter. I'm not sure why the IPMI wasn't accessible by the LAN, but it should share the same network port as the antsle.…
- No signal on VGA
I ran into the same issue attempting to use a simple VGA > HDMI cable. Solution: You need a VGA to HDMI Converter with USB Power. It works like a charm! Cost me ~$70. https://www.s…
- How to access the contents for SSD from a broken antsle server?
Hi @vmyantsle Since we've got the drive attached, can we use these commands to check out status of zpool again? zpool list zpool status Thank you, antsle Support
- How to access the contents for SSD from a broken antsle server?
Hi @daniel-luck , Thank you for your response. I was able to get the antsle boot up by choosing 'Antsle OS' option from the boot up list. None of the other option didn't get machine the boot up to…
- How to access the contents for SSD from a broken antsle server?
Hi @vmyantsle I'm not sure why the UUID would be identical. I'm going to reach out to our team. As for your case, I have replied with steps for getting the antsle booting again. You can also refer to…
- How to access the contents for SSD from a broken antsle server?
Hi @daniel-luck , Thank for your response and the detailed steps. I appreciate your support. I am seeing my Zpool UUID is same for all the devices - `17206638070832407033` including the one came from…
- How to access the contents for SSD from a broken antsle server?
Hi @vmyantsle I performed some testing on my antsle's tonight. The original antlets zpool is located on /dev/sda3 with uuid = 14017033468267654497 The other antlets zpool is located on /dev/sdb4 with…
- How to access the contents for SSD from a broken antsle server?
Hello @daniel-luck , Any thoughts on how i can recover the data from my HD (from my other antlse server). Your help will be greatly appreciated. Thanks vk
- Re-creating the hdd zpool...
Hi @infobro Thanks for the update. I have confirmed that both parted and mklabel (as sub command in parted) are both available in Gentoo-based edgeLinux as referenced in our Support article here:…
- Try to locate an antsle online doc
Hi @charlesatriz Have you tried using the article above? For your reference, here's the link again: https://docs.antsle.com/templates/templates Thank you, antsle Support
- Re-creating the hdd zpool...
Also, magically, after running SETUP at boot to re-order to boot sequence and move the USB to later in the stack /dev/sdb resurrected and I was able to run a "zpool replace hdd sdb" now I have all…
- How to access the contents for SSD from a broken antsle server?
Hello @daniel-luck & @lancem , I tried both all the suggested commands and attached the output here. zpool list NAME SIZE ALLOC FREE EXPANDSZ FRAG CAP DEDUP HEALTH ALTROOT antlets 216G 322K 216G - 0%…
- Re-creating the hdd zpool...
Thanks, Daniel. The actual problem I was observing is the refcount mismatch issue highlighted in this thread. https://github.com/openzfs/zfs/issues/7204
- Am I required to have a plan to upgrade?
Hi @brandonwolf Yes, I forgot to mention you can absolutely use the wget command, and that's what I'm using on my antsle's to download packages such as latest antMan as needed. Thanks for the great…
- Re-creating the hdd zpool...
Hi @infobro Thanks for sharing about the potential bug in ZFS. I've reached out to my team to let them know and for advice on steps going forward. Thank you, antsle Support
- How to access the contents for SSD from a broken antsle server?
Hi @vmyantsle You could try the command below to temporarily load the zpool with different name: zpool import -R /a -t addon /dev/sdc4 Please let us know how that works. Thank you, antsle Support
- Am I required to have a plan to upgrade?
Sorry for the delay in response, just wanted to say the manual steps you described worked great! Thanks Daniel For anyone else reading this, you can use wget instead of sftp. Log into…
- How to access the contents for SSD from a broken antsle server?
What if you try: zpool import (without a pool name or "-a"). This is supposed to list any pools that are "importable".