Recent activity
- Cannot start Antlet
Hi @lorde You can download the latest ISO's for edgeLinux and antMan here: http://anthill.antsle.com/#/downloads Thank you, antsle Support
- Main drive died, trying to recover antlets from ZPOOL mirror
Hi all, Upfront confession...I am NOT a linux person by any stretch of the imagination. We had our SSD die over the weekend, but the secondary/mirror drive seems to be fine. Following some helpful…
- Struggling with Anlet access
Hi @mzaremskas Thanks for reaching out in our antsle forums. Since you have an existing ticket, I will work on you this ticket. Thank you, antsle Support
- Upgrading edgeLinux 0.5.0 to latest
Hi @elte156 Here are some instructions on installing the latest antMan on older version of antsle OS (0.5.0 or higher): You will need to download the antMan bundle from your anthill.antsle.com…
- Upgrading edgeLinux 0.5.0 to latest
Hello, I'm currently trying to follow this guide to migrate my Antsle One from an outdated version of edgeLinux to the latest (2.0.0?) https://docs.antsle.com/system/edgelinux-os-a…
- Struggling with Anlet access
I have had a a couple of anlets running on my Antlse for some time now. I had to refresh my SSL certificates (which I get from Namecheap). Since that time, I can no longer access any of my antlets…
- No valid license issue
Hi @andrew-phillips I had updated your account in antHill. Try using these commands: service anthilld restart service anthilld status Then try reloading antMan. Thank you, antsle Support
- No valid license issue
So I have tried restarting anthilld & antman in terminal, I have also tried restarting antman from the GUI. When I run those status commands in the terminal I only get 1 line stating * Status:…
- No valid license issue
Hi @andrew-phillips Thanks for contacting antsle Support. Here are some troubleshooting steps below you can take for the licensing error. Is the anthilld service running on your antsle? Try…
- No valid license issue
The server has been down for 6 months, and had to put some things back together and now that all is set, I get this No valid license issue being displayed.
- motherboard component melted
I recently just mapped out brining it back to life with some different gear and I am so close to having so much progress and things complete! I just have an invalid license issue happening. I saved…
- Error install Edgelinux 2.0 - "selected_zpool_config.meta.skip == false"
Hi @jared_85k Thanks for the update. Sorry to hear you are having an issue with docker. After re-installing docker, did you enable the service with this command? systemctl enable docker Thanks,…
- Error install Edgelinux 2.0 - "selected_zpool_config.meta.skip == false"
Hey Daniel, I have already attempted this but it opens up a slew of problems. Firstly, when I do this, Antman installs. However, it does not start properly. Digging into the antman logs in turns out…
- Error install Edgelinux 2.0 - "selected_zpool_config.meta.skip == false"
Hi @jared_85k From looking at the snippet of the error, this is towards the last part of installation where we install antMan. Can you reboot your antlet and then run this command? upgrade-antman…
- sflow data forwarding
Hi @rmcilmoyle Yes, that is correct. We don't support installing 3rd party software onto edgeLinux. However, you can install whatever you'd like onto the antlets. Thank you, antsle Support
- Disable port 22 on br1
I enabled 2nd ethernet port br1 on the Antsle One D. I want this port to only respond to port 80/443 web traffic. How do I disable access to port 22 on this interface? Thanks!
- sflow data forwarding
I looked into this and determined that I'd have to install software into the base antsle host which I understand is a no go....
- sflow data forwarding
Hello @rmcilmoyle We have not tried it but you are welcome to experiment with it. Check out this article: https://docs.openvswitch.org/en/stable/howto/sflow/ Thank you, antsle Support
- Error install Edgelinux 2.0 - "selected_zpool_config.meta.skip == false"
During the installer I receive this error during the "Installing antman" steps... "selected_zpool_config.meta.skip == false" Any help would be appreciated.
- sflow data forwarding
Is it possible to have antsle forward sflow data for network flow analysis?