Hello all,
I tried posting this weekend and seems like my post never made it. Maybe I wasn't specific enough or posted to the wrong section but here goes attempt two.
What I am trying to do: connect to antlet via domain http
machine: Antsle Nano 8GB
plan: antMan Essential
antMan version: 3.3.1
edgeLinux: 2.0.0
What I have done:
- power on, let run setup etc..
- login via 192.XXX.X.XX:3000 (myantsle.local does not work)
- ssh [email protected] to upgrade-edgelinux upgrade-antman
- created a WP antlet on 10.1.1.10 (following https://youtu.be/uk107Vc1sMI), Antman Portforwarding from 192.XXX.X.XX:8010 to 10.1.1.10:80
- updated domain's A Record to point to my home public ip 90.YYY.YY.YYY (verified was changed by pinging the url)
- updated router portforwarding 80 and 443 to the antsle nano 192.XXX.X.XX 80 and 443
- in [email protected] created /etc/nginx/virtualhosts/exampledomain.io.conf following (https://docs.antsle.com/antlets/access-antlets#access-antlets-by-domain-name)
What works:
- able to see WP on 192.XXX.X.XX:8010
- able to see Antsle on my home public ip 90.YYY.YY.YYY (redirects to 90.YYY.YY.YYY/login)
- IF router is forwarded to 8010, able to see WP
What does not work:
- Unable to see WP on home public ip 90.YYY.YY.YYY:8010
- Unable to see WP via domain url
- Unable to see WP via domain url:8010
Looking for solution to routing of antlets. Any advise would be greatly applicated