It appears my Antsle One is dead. It wont boot, and if I go to the boot menu (or BIOS setup) no drives are shown. Perhaps the SATA controller is dead?
Is there anything I can do? Is it even possible to send it in for out-of-warranty service?
Antsle One is dead
Antsle TeamStaff
If no drives show up in the BIOS at all, check the simple things first. Open the case, reseat the SATA data and power cables on each drive, and if you can, connect one drive to another computer to see whether it spins up and is recognized. If the drives work elsewhere but the board doesn't see them, the board's SATA ports are the likely culprit. If a drive is dead, replace it and reinstall with antMan 4: antman4.antsle.com
— Antsle Team
Log in to reply. New here? It takes a minute.